PE Bottle Shape Liner Sealing Machine
To protect materials inside the Big Bag from any environmental reasons and for stopping material to dust outside of Big Bag, Liner should be placed inside. Our Bottle shape liner sealing machine is designed to form the liner with sealing and Roll lift up unit cutting operations, suitable for four loops big bag’s body, filling spout and Side Sealing unit discharging spout. Our Suspended liner sealing machine is designed to form the Suspended U & Conic shape Sealing unit liner with sealing and cutting operations, suitable for one or two loops big bag’s filling spout and body.
The bottle neck inner bag forming machine adopts PLC system, and the spindle motor is driven by the world’s advanced AC servo control technology, which has the characteristics of large torque, high efficiency, stable speed and low noise.
The design of operation panel is diversified, which can meet the requirements of different customers; the system adopts Chinese structural design, which is convenient for installation and maintenance.
|1||PE bag（M）width（mm）||1200 (Max)|
|2||Inner bag length(mm)||2500-3000mm|
|9||Installation dimensions（mm）||2200*2100（Including electrical cabinet3100）*1800|
|11||Applicable materials||LDPE,HDPE,NYLON coextrusion film|
To protect materials inside the big bag from any environmental reasons for stopping materials to dust outside of big bag ,liner should be placed inside. Our bottle shape liner sealing machine is designed to form the liner with sealing and cutting operations, suitable for four loops big bag’s body, filling spout and discharge spout.
Please do not use this control device in the following environment:
1. Where the voltage variation will exceed ± 10% of the freeze frame voltage.
2. The power supply capacity cannot be guaranteed in the place with specified capacity.
3. The room temperature is below 0 ℃ or above 35 ℃.
4. Outdoor or the place where sunlight will directly shine.
5. A place next to a heater (electric heater).
6. Places with relative humidity below 45% or more than 85% and places with dew.
7. Corrosive or dusty places.
8. Places prone to gas explosion or oil explosion.
9. If the place where the bottle neck bag forming machine is placed is prone to excessive vibration, place the control box in another place.