Operation principle of waste paper baling press machine
The rolling friction gap between the piston rod of the hydraulic cylinder and the engine cylinder of the waste paper baling press machine, and between the hydraulic cylinder and the guide are properly created. The support point ring made of metal material is preferred. The support point ring made of non-metal material with small heat shrinkable film index in hydraulic oil can also be used. The standard tolerance and average of the support point ring and sealing ring shall be strictly controlled to ensure the processing of each part.
Select suitable gear oil: gear oil and gear oil will be used to transmit working pressure, clean and cool. Improper selection will cause problems of hydraulic transmission system and landing in the morning. Therefore, we must purchase regular gear oil.
Reduce the dynamic and static friction resistance, modify the friction, change the boundary friction into liquid friction. If in the whole process of application of waste paper packer, the hydraulic transmission system will be shut down. Therefore, in the whole process of daily application, it is necessary to understand the maintenance of the hydraulic transmission system of waste paper packer and the reduction of the hydraulic transmission system of waste paper packer.
Waste paper packer is widely used in recent years. Do you know about waste paper packer?
waste paper baling press machine is a product of mechatronics, which is composed of mechanical structure, automatic control system, feeding system software and power device. The whole process consists of package pressing, round trip, case picking up, case transferring, contract issuing up and down, contract issuing down, contract receiving and other auxiliary time.
There are two types of waste paper baling machine in the market: vertical type and column type. The volume of column type waste paper packer is relatively small, because the packing specification is also relatively small, and the metal materials in the hydraulic transmission system of waste paper packer are eroded by water, which reduces the service life of components, and the eroded particles fall into the system software, causing wear.
The operation steps of the hydraulic baler are as follows:
1. If the machine branches the power supply and operates at the same time with other machines, it will not only damage the function of the machine, but also cause excessive heating of the plug and socket, which may cause the risk of fire. Special attention should be paid to the special voltage and capacity for this machine only.
2. The machine ground terminal must be connected to the ground. There is a risk of electric shock when it is not connected to the ground wire or not fully connected.
3. The cross-sectional area of the extension cord is more than 0.75m2 and less than 10m. The use of flexible cord beyond this range will not only damage the function of the machine, but also cause excessive heating of the plug and socket, which will cause the risk of fire.
4. Gloves, protective glasses and masks must be used when installing or packing super work. If not used, it may cause injury or health hazard.
5. This machine is a packer that uses the packing belt on the packed object. Do not use for other purposes. The packed items refer to the items that need to be packed. Do not put your hands or body close to the main machine.
⒍ Do not remove the panel, jacket, door and other parts when using the machine. When the parts are removed, the machine will not only break down, but also lead to accidents.
⒎ Do not modify the machine.
8. Do not place the power cord on the forklift or other passageways, or directly press it on the power cord or other places. Once the skin is damaged or broken, there will be danger.
⒐ please do not use wet hands to plug the power plug, there is a risk of electric shock.
⒑ there is a risk of electric shock when packing with water or wet goods.
11. When not in use, the plug on the socket must be pulled out. Insulation degradation, resulting in electric shock or fire due to leakage.
12. When the heating plate is at a very high temperature, please do not put combustible materials around the back of the machine, there is a fire risk.
Post time: Dec-16-2020