Fibinc Kayan masana'antu na FIBC
Siffantarwa
Mun tsunduma cikin kerarre, wadata, da fitarwa na samar da fibc yankan tare da injin yankan yankakken. Injin da aka bayar da kayan yanke masana'antar yankewa ne mai nauyi da tsari mai nauyi, wanda aka yi amfani dashi don ingantaccen yankan kayan. An bayar da injin da aka yanka shine tsarin tushen microprocessor, wanda aka bayar tare da kwamiti mai kulawa da fasalin. Injin da aka bayar da kayan yanka ya ceta sarari da amfani da manpower.
Abin ƙwatanci
Mu CSJ- 1400, CSJ- 2200 da CSJ-2400 suna da abin dogaro da ingantattun injuna na yankan FIBC (Jummo Jummo) sun samar da yankuna na FibC (yankan Jumbo) suna samar da yankuna na FibC (yankan Jummo) sun samar da yankuna na FibC (yankan Jumbo
Fasas
Injin da aka kirkira na musamman yana haɗa da manyan ayyuka daban-daban a jumbo jakar kayan kwalliya, OFO JUMBOGED, OFO JUMBOMIND, YAWBO-Kayan Cinji.
1.Makux yankan yankan ƙasa daga 1350mm zuwa 2400mm
2.marking tare da alamar alkalami ko ink allura don lebur ko tubular masana'anta da ake samu azaman zaɓi.
3. Platt Gudanar da Tsarin Kulawa.color Man-na'urori Interface, wanda ke yin saiti, Nuni, yin rikodin ƙarin bayyananniya kuma daidai, sauki aiki.
4.Hhaboulic atomatik JUMBO-masana'antar masana'anta na ciyarwa & EPC
5.ibipped shigo da tsarin sarrafawa na Servo don daidai da yankan da sauri.
6...3Ka hemming (ultrasonic nadadara).
7.Hot da kuma sandar masana'anta na yankan suna samuwa.
Babban sigogi na fasaha
| Abin ƙwatanci | CsJ-2200 |
| Yankan fadi | Max.2200mm |
| Yankan tsawon | 500-10000mm |
| "X" rami | 300-500mm |
| "O" rami | 300-550mm |
| Yankan daidai | ± 5mm |
| Saurin samar | 10-20pcs / min (masana'anta yankan) 10-15pcs / min ("x" rami ko "o" rami) |
| Jimlar shigar | 10Kww |
| Irin ƙarfin lantarki | 380v 3hamba 50Hz |
| A iska | 6kg / cm² |
| Nauyi na inji | 2200kg |
| Gaba daya girma |
8000 * 2500 * 1800mm (Tsawon * nisa *
|
Roƙo
Amfani da masana'anta jumbo jaket kamar, jumbo jakar masana'anta, jumbo jakar suttric, masana'anta jakar
Bayanin kula
Tare da wannan ingantaccen tsari, tsarin mashin, zaku iya sanya kayan masarufi na Polypropylene da girman ramin spout. Za'a iya sarrafa na'urorin da aka yanke tsawon lokacin da ake yankewa daban.
Kafin fara aiwatarwa, mai aiki ya kamata ya sanya girman dama na yankan ramin rami. Daidai matsayin ramin ya kamata a daidaita. Ana amfani da Centering naúrar ta dace da sashin sarrafawa. Bayan saita da ake so yanke, gudanar da aikin yana tafiya ta atomatik har sai ya kai adadin da aka tsara.
Kuna iya buƙatar daidaita lokacin, tsawon lokacin yankewa da zazzabi zafi gwargwadon kauri daga masana'anta. An yi karatun da hannu. Ana samun rukunin atomatik na atomatik na iya aiki zaɓi.
