Dakatar da fibc pe liner liner yin na'ura CSJ-1200
Dakatar da fibc pe liner liner yin na'ura CSJ-1200
Don kare kayan a cikin jaka mai girma daga kowane dalilai na muhalli da dakatar da kayan zuwa ƙura a waje da Big Bag, ya kamata a sanya linzami a ciki. An tsara na'urar Liner ɗin da aka ɗora a cikin injin ɗinmu don ƙirƙirar layin tare da rufe jikinsu, ya dace da madaukai huɗu na sawun baya. An tsara injin da aka dakatar da tsarin linzamin mu don ƙirƙirar na'urar dakatar da U8 tare da seloing da yankan ayyuka, dace da ɗayan madaukai ɗaya ko biyu.
Da Dakatar da fibc pe liner liner yin na'ura CSJ-1200 adopts PLC system, and the spindle motor is driven by the world’s advanced AC servo control technology, which has the characteristics of large torque, high efficiency, stable speed and low noise.
An bambanta ƙirar aikin da aka bambanta, wanda zai iya biyan bukatun abokan ciniki daban-daban; Tsarin ya ɗauki ƙirar tsarin ƙasa, wanda ya dace da shigarwa da tabbatarwa.
| 1 | Jakar pe (m) nisa (mm) | 1200 (Max) |
| 2 | Zama na ciki (mm) | 2500-3000mm |
| 3 | Yanke madaidaicin (mm) | ± 10mm |
| 4 | karfin samarwa (PC / H) | 60-120 |
| 5 | Mai tsaron lafiyar zafin jiki | 0-350 ℃ |
| 6 | Jimlar iko | 36kw |
| 7 | Irin ƙarfin lantarki | 380V (50Hz), 3ph |
| 8 | A iska | 10kg / cm2 |
| 9 | Adadin girma (mm) | 2200 * 2100 (gami da kabilan lantarki3100) * 1800 |
| 10 | Mashin mashin (kg) | 3000kg |
| 11 | Kayan aiki | LDPE, HDPE, NYLON COEXBOXRIRGION FASAHA |
Roƙo
Don kare kayan a cikin babban jaka daga kowane dalilan dalilai na muhalli don tsayawa kayan da ƙura a waje da Big a waje da Big a ciki. An tsara injin layin da aka sanya linzamin Liner don ƙirƙirar Liner tare da hatimin tare da yankan jikin, wanda ya dace da madaukai hudu manyan jakar jakar, cika spout da zubar da spout.
Yanayin aiki
Dakatar da fibc pe liner liner yin na'ura CSJ-1200
Don Allah kar a yi amfani da wannan na'urar sarrafawa a cikin mahalli masu zuwa:
1. Inda bambancin wutar lantarki zai wuce ± 10% na daskararren ƙarfin ƙarfin lantarki.
2. Ba za a iya tabbatar da ikon samar da wutar lantarki ba a wurin da ƙayyadadden ƙarfin.
3. Zazzabi dakin yana ƙasa 0 ℃ ko sama da 35 ℃.
4. A waje ko wurin da hasken rana zai haskaka kai tsaye.
5. Wuri kusa da mai hita (mai hife).
6. Wuraren tare da dangi mai zafi a ƙasa 45% ko fiye da 85% da wurare da raɓa.
7.
8. Wuraren da fashewar fashewar gas ko fashewar mai.
9. Idan wurin da ake sanya jakar wuya jaka aka sanya na'ura na'ura ke da kima ga wuce haddi rawar jiki, sanya akwatin sarrafawa a wani wuri.Shigarwa
1. Kulawa Kulawa:
Da fatan za a bi umarnin don shigar da shi daidai. Kafin akwatin sarrafawa an haɗa shi da wutar lantarki, don Allah a bincika ko ƙarfin lantarki don haɗa daidai yake da akwatin sarrafawa, kuma ana iya samar da wadataccen samar da wutar lantarki. Idan akwai mai canjin iko, iri ɗaya ne don bincika kafin samar da wutar lantarki. A wannan lokacin, maɓallin maɓallin maɓallin kunna wutar lantarki akan kwalban wuyan ƙwallon ciki da aka tsara kayan zane-zanen.
2. Igiyar wutar lantarki:
Don Allah kar a danna igiyar wutar lantarki tare da nauyi ko karkatar da shi fiye da kima. Don Allah kar a sanya igiyar wutar lantarki kusa da sashin juyawa, aƙalla 25 mm.
3. Grounding:
Don hana girgiza wutar lantarki ta hanyar hayaniyar hayaniya da kuma zubar da wutar lantarki, an cire ƙasa a kan layin wutar lantarki dole ne a ƙasƙantar da shi yadda yakamata. Idan kana son haɗa na'urar kayan aikin lantarki, da fatan za a bi matsayin da aka nuna.
4. Ragewa da Disassebly:
Don cire akwatin sarrafawa, dole ne ka fara kashe wutar da cire wutar lantarki. A lokacin da ba a cire wutar lantarki ba, kada ku ja igiyar wutar lantarki, dole ne ku riƙe wutar lantarki da hannu kuma ku cire shi. Akwai haɗari mai haɗari mai haɗari a cikin akwatin sarrafawa, don haka don buɗe murfin akwatin sarrafawa, kuna buƙatar kashe ikon kuma jira sama da murfin akwatin.
Tabbatarwa, dubawa da gyara.
Ya kamata a gudanar da gyaran da kuma masu fasaha.
Da fatan za a kashe wutar lokacin da ake canza mai yanke kuma mutu cuter.
Da fatan za a yi amfani da sassan gaske.
